Counting the USE results is not the easiest procedure. Let's see how your knowledge is assessed and how scaling, primary and test scores affect it.

amount primary points differs in different subjects. Each completed USE task is estimated at 1 or more points. The sum of these points is the primary score of the examination paper. Further, a correspondence is established between the primary and test scores (in this case, the maximum test score is always 100).

The scale for translating primary points into scaled ones depends on the complexity of the tasks and the statistical analysis of the USE results for all exam participants and is calculated using a special computer program. This scale is not linear.

To make it clearer, let's figure out the basic terms.

What is scaling?

What are primary and test scores?

The primary score is the sum of the grades for completed assignments. At the same time, a correctly completed task of part A or B is estimated at 1 point, part C - up to 4 points.
The test score is a point on a 100-point scale, obtained using special statistical processing of the completed forms at the stage of final processing of the results.

Another feature of the conversion scale is that a small change in the primary score at the edges of the scale (that is, when the primary score is close to zero or to the maximum value) leads to a significant change in the test score (for example, 1 primary score corresponds to 6 test scores in all subjects except languages), while in the middle of the scale, a change in the primary score by 1 leads to a change in the test score by 1 or 2.

Why are 60 test points awarded for 63% of completed tasks?

The percentage of correctly completed tasks is the number of correctly (partially correct) completed tasks in relation to the maximum possible score for the test. The final (test) score is a score given taking into account the difficulty of completing each task, and is determined by a specialized procedure - scaling.

How is the final score determined?

The specification for each subject indicates how many primary points are awarded for each correctly completed CMM task. When processing the examination paper, the primary points for correctly completed tasks are summed up. Conversion to test scores is carried out by a special program using an approved scaling technique.

How many days are examination papers checked?

The check and processing of the USE forms in the Russian language and mathematics in the region should be completed no later than 6 days, and for other subjects - 4 days after the corresponding exam.

How many days are exam papers in the Russian language checked?

The regional information processing center must complete the processing of USE forms in Russian language and mathematics no later than 6 days after the corresponding exam. The timing depends on the size of the subject of the Federation, the presence of remote territories, the number of participants. Another 2 days of work are checked at the federal level. Thus, information about the results in the Russian language is communicated to the USE participants, as a rule, after 8-10 days.

When is the minimum number of points announced?

The minimum number of USE points in each general education subject is announced by Rosobrnadzor 6-10 days after the USE.

How many points do you need to score in the Russian language to get a "C"?

The minimum threshold confirming the successful passing of the exam was 40 points in 2008, and 37 points in 2009. In accordance with the current regulatory framework, since 2009, the transfer of USE scores to a five-point assessment system has not been carried out to mark the certificate.

What if you didn't get your marks in Russian or mathematics?

For a graduate to obtain a certificate, the results of the exam in the Russian language and mathematics are important. Every year, during the main period of the USE (in May-June), after all USE participants have passed the exam in the subject, Rosobrnadzor sets the minimum number of points. If you have achieved it, you will receive a certificate. If the graduate does not gain the required minimum in one subject, then it can be retaken on reserve days (see). If the results are low in both Russian and mathematics, a certificate is not issued. Such a graduate receives a certificate. He can retake exams and get a certificate only next year.

When will the individual USE results be known?

The terms and procedure for familiarization with the results of the USE are determined by the education management body of the region, while it is established that the results of the USE should be communicated to the USE participants:

• within the main terms no later than 3 working days from the date of issuance of the order of Rosobrnadzor on the establishment of the minimum number of points in the relevant general education subject
• in additional terms - within 3 days after the approval of the protocols of the results of the USE GEC.

Where can I find out the results of the exam?

A graduate of the current year will find out the results of the USE at his school, other USE participants - in the PPE or in another way, which is established in each region by the educational authority. Information on the results of the exam is provided free of charge!

Are the USE scores converted to 5-point grades?

In accordance with the current regulatory framework, since 2009, the transfer of USE scores to a five-point assessment system has not been carried out. During the exam, a hundred-point assessment system is used. Provides for the establishment of a minimum number of USE scores (minimum threshold) for each general education subject, confirming the mastering of the main programs of secondary (complete) general education by the graduate.

What is the maximum number of points?

The USE results are assessed on a 100-point system. The maximum number of points in each subject is 100.

Will the USE results be posted on the Internet?

The publication of the USE results at the federal level was tested during the experiment. Now, according to the current regulatory legal documents, the subjects are responsible for informing USE participants about the results Russian Federation... In some regions it was decided to post the results passing the exam in the Internet. In the Krasnoyarsk Territory, such a decision has not yet been made.

We will be announced the number of points received, but how can you look at your work?

You can see your work when considering an appeal on disagreement with the points set. The Conflict Commission requests from the RSCI printed images of the examination paper of the graduate who submitted the appeal, which are then presented to the USE participant. Examination papers completed by the USE participants are stored in the regional information processing center (RCOI).

What does it mean "to get information about the results of the exam"?

This means knowing the points you earned on the exam. Local governments of the constituent entity of the Russian Federation are responsible for notifying the USE participants about the results of passing the exams. The communication scheme should be communicated to the participants in advance. A graduate of the current year will find out the results of the USE in his school, other USE participants - in the PPE or in another way, which is established in each region by the educational governing body. This usually happens within 6-10 days after passing the exam.

In preparing the article, materials from the official information portal of the Unified State Exam were used

TRANSLATION OF PRIMARY POINTS TO TEST POINTS (SCALING)

Primary scores - these are points before being transferred to a 100-point scale (for example, one completed task in Part A is estimated at 1 primary point).
Test points - this is final points after transferring to a 100-point scale, which will be indicated in your USE certificate. It is impossible to recognize them without a table.
In the table zones with scores below the minimum are highlighted.

This scale is relevant for 2012-2013. The only exceptions for 2013 are history and geography due to the fact that the maximum primary score was reduced by one (but the change is small, therefore the scale will not undergo significant changes).

Analyzing the above scale, one can trace some tendencies, which will also help when choosing subjects for passing the exam:
● getting 90-100 points is the hardest thing in Russian and in literature, every point is very valuable;

● on delivery foreign languages and informatics you can score a fairly large number of points, while making a moderate number of mistakes;
● minimum scores are easiest to get also for foreign languages and informaticsand also on literature.

Conversion of the primary score to the test (scaling)

For an objective assessment of the level of work performed by each USE participant, in comparison with other participants in the exam, a special method of scaling the USE results is used. It was developed by leading Russian experts in the field of pedagogical measurements based on internationally recognized test models.

What is the essence of the scaling procedure?

When conducting the exam, many graduates from different educational institutions participate in the exam. They do not have the same level of training and perform a variety of CMM options. In this regard, the question arises of how to objectively assess and, most importantly, compare the level of their preparedness, because all graduates have equal rights when passing final exams and when entering a university or college?

In the list of terms of the exam, there are concepts "Primary score" and "Test score" .

Scaling is a translation procedure primary points in test, the process of forming the rules for calculating test points based on the results of examinations based on statistical data.

In the method of scaling the USE results, used in 2012, a step-by-step establishment of the correspondence between test and primary scores for each general education subject in which the USE is held is implemented.

Stage I

First, in the range of primary scores from zero to the maximum primary score PBmax for each general education subject of the USE, two values \u200b\u200bof primary points are selected: PB1 and PB2, separating the groups of participants with different levels of training in this subject.

The value of PB1 is chosen as the lowest primary score, the receipt of which indicates the mastering by the exam participant of the basic concepts and methods in the corresponding general education subject. It is determined on the basis of an examination of the demonstration version for a given general education subject by specialists of general education, colleges and universities of various profiles from different constituent entities of the Russian Federation. The examination is carried out taking into account the level of complexity of each task and the significance of the content, skill, skill, method of activity being tested by it in the context of a general educational subject. At the same time, the requirements for the PB1 value correspond to the requirements that were used in determining the PB1 of the last year (to ensure the equivalence of the scales of two years). The PB2 value is determined by the professional community as the lowest primary score, the receipt of which indicates a high level of preparation of the exam participant, namely, the presence of systemic knowledge, mastery of complex skills, the ability to perform creative tasks in the relevant general education subject. If the specification of the examination option has not changed compared to last year, then PB1 and PB2 also remain unchanged. If the structure of the examination work or the complexity of the tasks of the control measuring materials have changed, then new values \u200b\u200bof PB1 and PB2 are set taking into account the existing changes.

II stage

The primary scores PB1 and PB2 are assigned test scores TB1 and TB2 for each general education subject.

For mathematics and the Russian language (compulsory subjects for passing the exam), the minimum test values \u200b\u200bare selected as TB1 values. uSE scores 2012, established by the orders of Rosobrnadzor: mathematics - 24, Russian - 36. These values \u200b\u200bcoincide with the minimum USE scores in 2011 in mathematics and Russian, respectively.

Test scores TB2 for the Russian language and mathematics, as well as test scores TB1 and TB2 for other general education subjects (optional subjects) are set equal to the same scores in 2011. Table 1 shows the values \u200b\u200bof PB1 and PB2, TB1 and TB2 for 2012.

Table 2 Values \u200b\u200bof boundary primary and test scores in 2012

It should be emphasized that the minimum test scores, indicating the mastery of the school course in elective subjects, are established by Rosobrnadzor after the main exam and the receipt of statistical data on the options for the exam 2012 and in some subjects may not coincide with TB1.

Stage III

For each general education subject, the correspondence between the primary score and the test score is determined based on the following procedure. Primary

A score of 0 is assigned a test score of 0, and a maximum primary score of PBmax is assigned a test score of 100. All intermediate primary scores between 0, PB1, PB2 and PBmax are converted to test scores proportionally distributed between the corresponding test score values: 0, TB1, TB2 and 100. Figure 1 shows the resulting dependence.

Figure: 1. Correspondence between test and primary scores

If the intermediate primary scores correspond to the fractional test scores, then the test score is rounded to the nearest larger integer.

This procedure allows you to agree on the test scores of equally trained participants in 2011 and 2012. and ensures comparative comparability of exam results over the years.

The formula for transferring USE points

The scale for converting primary USE scores into test ones, given in the table, is obtained on the basis of calculations using the following formula. If you wish, you can calculate it yourself.

where t is the test score of the USE (according to a 100-point system, which goes to the USE certificate), θ is the primary score of the person who passed the USE, θ min is the estimate corresponding to one primary score θ m ax, Is the estimate corresponding to the primary score, one less than the maximum possible. Rounding is carried out to the nearest whole number according to the rules of mathematics. Zero primary score corresponds to 0 for the Unified State Exam, and the maximum possible primary score corresponds to 100 points for the Unified State Exam.

The table for converting USE points into grades

Since 2009 uSE test scores do not translate into standard school grades on a five-point system. This is done because the USE scores no longer affect the grade that is put in certificate, and there is no need to count them. But it is still very difficult to give up the five-point equivalent of the USE marks. Therefore, we give below the tables, according to which you can roughly draw the correspondence of the USE scores to the standard school grade.

Does the exam affect the school certificate?

The USE results have long had no effect on the marks in the school certificate. Points scored on the exam, are exhibited separately in the certificate of passing the exam, if the score is higher minimum. If the USE score is less than the minimum in compulsory subjects - Russian and mathematics, then neither the USE certificate, nor the certificate will be issued. If the mark on an optional subject on the exam below the minimum score, then it will not be noted anywhere, as if you did not pass this exam.

SUMMARY Primary score - this is a preliminary score Unified State Exam... The primary score is obtained by direct summation of the marks for correctly completed assignments. Each correct answer has a certain coefficient. For example, a correctly completed scaling task from the primary score.

For an objective assessment of the level of work performed by each USE participant, in comparison with other participants in the exam, a special method of scaling the USE results is used.

It was developed by leading Russian experts in the field of pedagogical measurements based on internationally recognized test models.

What is the essence of the scaling procedure?

When conducting the exam, many graduates from different educational institutions participate in the exam. They do not have the same level of training and perform a variety of options for control and measurement materials (CMM). In this regard, the question arises of how to objectively assess and, most importantly, compare the level of their preparedness, because all graduates have equal rights when passing final exams and when entering a university or college?

In the list of USE terms, there are the concepts of "primary score" and "test score".

Primary score - This is the preliminary USE score, which is obtained by directly summing the number of correct answers, each of which has a certain coefficient. Each completed USE task is evaluated by the number of points from 1 to 6. The maximum number of primary points for all CMM tasks in various subjects ranges from 37 to 80. Primary USE scores are converted into test points using the scaling technique.

Test points - final points based on the USE results, which are set on a 100-point scale as a result of a scaling procedure that takes into account all statistical materials obtained as part of the USE of a given year. Test scores differ from primary scores.

Scaling - this is the procedure for converting primary points into test points, the process of forming the rules for assigning test points based on the results of examinations based on statistical data.

In the methodology for scaling the USE results, used in 2012, a phased establishment of the correspondence between test and primary scores for each general education subject for which the USE is held is implemented.

Stage I

First, in the range of primary scores from zero to the maximum primary score PBmax for each general education subject of the USE, two values \u200b\u200bof primary points are selected: PB1 and PB2, separating groups of participants with different levels of training in this subject.

The value of PB1 is chosen as the lowest primary score, the receipt of which indicates the mastering by the exam participant of the basic concepts and methods in the corresponding general education subject. It is determined on the basis of an examination of the demonstration version for a given general education subject by specialists of general education, colleges and universities of various profiles from different constituent entities of the Russian Federation. The examination is carried out taking into account the level of complexity of each task and the significance of the content, skill, skill, and method of activity being tested by it in the context of a general educational subject. At the same time, the requirements for the PB1 value correspond to the requirements that were used in determining the PB1 of the last year (to ensure the equivalence of the scales of two years).

The PB2 value is determined by the professional community as the lowest primary score, the receipt of which indicates a high level of preparation of the exam participant, namely, the presence of systemic knowledge, mastery of complex skills, the ability to perform creative tasks in the relevant general education subject.

If the specification of the examination option has not changed compared to last year, then PB1 and PB2 also remain unchanged. If the structure of the examination work or the complexity of the tasks of the control measuring materials have changed, then new values \u200b\u200bof PB1 and PB2 are set taking into account the existing changes.

II stage

The primary scores PB1 and PB2 are assigned test scores TB1 and TB2 for each general education subject.

For mathematics and the Russian language (compulsory subjects for passing the Unified State Exam), the TB1 values \u200b\u200bare the minimum test scores of the 2012 Unified State Exam established by the orders of Rosobrnadzor: mathematics - 24, Russian - 36. These values \u200b\u200bcoincide with the minimum USE scores in 2011 in mathematics and the Russian language, respectively.

Test scores TB2 for the Russian language and mathematics, as well as test scores TB1 and TB2 for other general education subjects (optional subjects) are set equal to the same points in 2011. Table 1 shows the values \u200b\u200bof PB1 and PB2, TB1 and TB2 for 2012.

It should be emphasized that the minimum test scores indicating the mastery of the school course in elective subjects are established by Rosobrnadzor after the main exam and statistical data on the 2012 USE versions used and in some subjects may not coincide with TB1.

Table 1. Values \u200b\u200bof boundary primary and test scores in 2012

Stage III

For each general education subject, the correspondence between the primary score and the test score is determined based on the following procedure. The primary score of 0 is assigned a test score of 0, and the maximum primary score of PBmax is assigned a test score of 100. All intermediate primary points between 0, PB1, PB2 and PBmax are converted to test, proportionally distributed between the corresponding values \u200b\u200bof test scores: 0, TB1, TB2 and 100. Figure 1 shows the resulting dependence.

Figure: 1. Correspondence between test and primary scores

If the intermediate primary scores correspond to the fractional test scores, then the test score is rounded to the nearest larger integer.

This procedure allows you to agree on the test scores of equally trained participants in 2011 and 2012. and ensures comparative comparability of exam results over the years.

Every graduate who wants to become a student of one of the universities of the Russian Federation in 2018 has a difficult task - to successfully pass the Unified State Exam, as well as to choose the right educational institution and faculty for submission of documents. The majority of 11th graders and their parents are faced with the final exam grading system for the first time and often find it difficult to find answers to the questions that arise. Therefore, we decided to shed light on important points.

In 2017-2018, the basic rules for passing the exam will not be significantly changed. This means that for graduates, the 100-point assessment system for final tests will also be relevant.

How is it going?

During the examination of the examination papers, for each correctly completed task, the graduate receives the so-called "primary points", which upon completion of the examination of the work are summed up and transferred to the "test score", which is indicated in the USE certificate.

Important! Since 2009, the scale of converting the primary and test scores of the USE into the traditional school five-point grades has not been officially used, because in 2017 and 2018 the final exams are not included in the certificate.

Checking work is done in two ways:

• automatically (using special programs and technical means);
• manually (the correctness of the expanded answers is checked by two independent experts).

It is quite difficult to dispute the result of an automatic check. If, when filling out the answer table, the basic rules were not followed, the computer may not protect the result, and only the graduate himself will be to blame for this, who has not followed a number of mandatory rules.

If controversial issues arise during the expert review, a third specialist is involved, whose opinion will be decisive.

When to expect results?

The following time frames apply by law:

• data processing (on compulsory subjects) in the RSCI should not last longer than 6 calendar days;
• for data processing (optional subjects), the RCRO is given 4 days;
• verification at the Federal Testing Center should take no more than 5 business days;
• approval of the results by the State Examination Commission - 1 more day;
• up to 3 days for sending the results to the USE participants.

In practice, it can take from 8 to 14 days from the moment of passing the exam to receiving the official result.

Converting USE scores into grades

Despite the fact that officially in 2018, the scale for converting points in USE subjects into a five-point assessment is not used, many still want to interpret their result in a more familiar "school" system. To do this, you can use special tables or online calculators.

The table for converting test scores of the OGE into grades

The second method is a little easier and more convenient than finding the required values \u200b\u200bin the cells of a huge table. It is enough just to choose a subject (mathematics, Russian language, chemistry, physics, history, english language, social studies ... and other subjects), enter data and get the desired result in a matter of seconds.

We suggest trying how simple and convenient it is to use in practice online calculators of the USE score and its translation into a 5-point grade.

Transfer of points from primary to test

Converting USE scores into grades

Internet systems for applicants

The 2017-2018 academic year is over, the exam has been passed, the results are known, and even the interactive scale for translating primary points showed that the USE result was in a fairly good range ... But is this enough to enter the desired university?

Evaluate your real chances of joining based on test scores and the university's minimum passing threshold.

Important! The minimum passing score is formed by the university itself. It will directly depend on the points of applicants who apply in 2018. The more popular the specialty, the higher the passing score will be.

Often, even 100-point results are not enough for admission to the budget at the TOP faculties. Chances to see their surname in the lists of those who entered such directions are only for the prize-winners of the Olympiads, who give significant additional points.

In 2018, the most popular services for selecting a university and monitoring the threshold of entrance points for various specialties will be:

1. Ucheba.ru
2. Apply online
3. Higher School of Economics calculator
4. Postyplenie.ru
5. Typical applicant

Finding these services is very easy. It is enough to enter their name into any search engine.

2018-2019 academic year will be a graduation ceremony for many Russian schoolchildren who are already concerned about the successful passage of the Unified State Exam and successful admission to a good university.

We will tell you how the examination papers are checked in different subjects, how the scale for translating USE scores into grades works, and what innovations can be expected in 2019.

Principles for evaluating the work of the exam 2019

For several recent years uSE system in a number of subjects has undergone significant changes and has been brought to the optimal (according to the organizers) format, which makes it possible to fully assess the amount of knowledge of a graduate in a particular subject.

In 2018-2019, no cardinal changes are expected, and it is safe to say that the same principles will be applied to assessing graduates' work as in 2017-2018:

1. automated check of forms;
2. involvement of experts in the verification of tasks with detailed answers.

How does a computer evaluate?

The first part of the examination work involves a short answer to the questions posed, which the USE participant must enter in a special answer form.

Important! Before starting the work, be sure to read the rules for filling out the form, since an incorrectly executed work will not pass an automated check.

It is quite difficult to dispute the result of a computer check. If the work was not counted due to the fault of the participant who incorrectly filled out the form, the result is equated to unsatisfactory.

How do experts assess?

In many subjects, in addition to the test part, there are tasks for which it is necessary to give a full detailed answer. Since it is impossible to automate the process of checking such answers, experts are involved in checking - experienced teachers with extensive work experience.

Checking the exam, the teacher does not know (and even with a great desire cannot find out) whose work lies before him and in which city (region) it was written. The check is carried out on the basis of uniform assessment criteria developed specifically for each subject. Each work is checked by two experts. If the opinion of the experts coincides, the assessment is put on the form, but if the independent appraisers disagree, then a third expert is involved in the verification, whose opinion will be decisive.

That is why it is important to write legibly and accurately so that there is no ambiguous interpretation of words and phrases.

Primary and test scores

Based on the results of the test, the USE participant is awarded a certain number of primary points, which are then converted into text (points for the entire test). Different subjects provide for different maximum primary points, depending on the number of tasks. But after bringing the result according to the corresponding table, the USE participant receives a final test score, which is the official result of his final tests (maximum 100 points).

So, in order to pass the exam, it is enough to collect the established minimum threshold for the primary score:

Based on these numbers, you can clearly understand that the exam is passed. But what is the grade? The online scale of 2018 will help you with this, designed specifically for transferring primary USE scores to test ones, which will also be relevant for the results of 2019. A handy calculator can be found at 4ege.ru.

Announcement of official results

Graduates are always worried about the question - how quickly can you find out what result was obtained upon passing and what the scale will be in 2019 for translating the points scored on the exam into traditional grades.

Teachers often undertake to reassure the students, working through the tasks of the USE tickets immediately after the exam and assessing the quality of the work done by the students and the amount of primary points scored. Official results need to wait 8-14 days, in accordance with the established regulations for the USE-2019. On average, the organizers approve the following inspection schedules:

• 3 days to check the work;
• 5-6 days to process information at the federal level;
• 1 working day for approval of the results of the GEC;
• 3 days for posting results on the network and transferring data to educational institutions.

In the event of unforeseen situations and technical problems, these terms can be revised.

You can find out the owl score:

• directly at your school;
• on the check.ege.edu.ru portal;
• on the website gosuslugi.ru.

Converting scores to grades

Since 2009, the results of the USE are not included in the graduate certificate. Therefore, today there is no official state system for translating the USE result into an assessment on a school 5-point scale. Within the framework of the introductory campaign, it is the test score gained on the exam that is always summed up and taken into account. But, many students are still interested to know how they passed the exam - for 3 or 4, 4 or 5. For this, there is a special table in which correspondences for each of the 100 points in each subject are detailed.

It is rather inconvenient to use such a table. It is much easier to find out how you passed the Russian language, mathematics or history using the online calculator 4ege.ru, which also contains a scale for translating USE points, which is relevant for 2019 graduates.

Having received the result of the exam, it is worth deciding on the university as soon as possible, comparing its capabilities with a real competition for specialties of interest. So, the practice of past years shows that in a number of cases it is difficult to get into the most popular areas in the capital's universities, even with high scores, because not only the holders of the 100-point USE results, but also the winners of the largest Olympiads of the 2018-2019 academic year will compete for places.